How to Measure

Please read these instructions carefully.
You'll measure the length, height and depth of your radiator. Then, to each of these dimensions, ADD 1 inch for clearance. (Measure 2 or 3 times to be sure the measurements are accurate.) Remember, these easy-to-assemble custom radiator enclosures are custom-cut just for you, and are non-returnable.

measure-radiator

Radiator Cover Length (See diagram A)

  1. Measure beyond pipes and valves at both ends of the radiator.
  2. ADD a minimum of 1 inch.

Radiator Cover Height (See diagram B)

  1. Measure from the floor to the top of the radiator or valve (in open position), whichever is higher.
  2. ADD a minimum of 1 inch.

Radiator Cover Depth (See diagram C)

  1. Measure the depth of the radiator at its deepest point. (This is usually, but not always, at the radiator feet).
  2. ADD a minimum of 1 inch.

Please Note:

We suggest you add at least 1 inch to the length, height and depth of your radiator grille. A custom radiator enclosure that is a little large will slip on easily and still provide the elegant "fine furniture" appearance you are looking for. (One too small will not go on at all!).

 

If your radiator heats properly but doesn't have the "look" you'd like, a custom radiator grill is an excellent alternative! A custom radiator grill is manufactured to your needs and taste, and will make any radiator more efficient by directing heat energy where it's needed.